I have an interesting follow-up to this thread. I’ve installed my second white, same room, same type of light bulbs, different circuit (of course), with the only difference being that this circuit is 3-way (this thread helped with getting it wired). For these lights however, I experience the flickering regardless of whether the switch is configured to leading or trailing edge (and the trailing edge switch did work for the others on the single pole circuit).
In case it’s relevant, the order of the steps I took in configuration were:
- set to multi-way + dumb mode
- set to dimmer
- set to trailing edge (also tried with leading edge)
I can try with a different switch, but is there anything else I should try first?