This will be a thread for listing out any bugs you may find and/or any enhancements you’d like to see for the Red Series mmWave Switch (VZW32-SN). This is not a thread for troubleshooting personal problems – please create a new thread so we can properly help. Please select at least three tags: P…

I see that we also target info report and our data is getting transmitted to mqtt. Do you think that we use your add-on by modifying? If so, how can we achieve it?

@EricM_Inovelli can you tell me if mmWave coordinates getting exposed to zwave js in home assistant? I know that those are getting exposed in zigbee2mqtt but it does not seem like it for zwave. I would like to create visual tool to show location of the presence. Thanks again for hard work.

To add another data point on the room size/distance tuning parameters (P103+). I am using SmartThings and the parameters don’t seem to work at all. At first I thought the sensor was just way to sensitive, no matter how I changed the parameters it kept seeing through walls. Finally I set the sensiti…

Is there any plan to extend support for the other three detection/interference zones? I’m also having trouble getting person position info. Both feature seem to be available on blue though.

@knozturk we have not been able to expose the extra features of the mmwave chip via Z-wave (like we did with Zigbee), but hope to be able to in the future. Zigbee is more flexible and it was much easier to build out the complexities of extra zones, interference areas, etc. @SReg Can you explain som…

I wonder if this post belongs in this thread. Seems that there might be a bug with the presence detection of the Red series motion switch. Thoughts? [image] VZW32-SN intermitintly stops detecting occupancy Product Support I just received my unit today and in…

Eric, I hate to ask this but is there anybody working on this currently? I am just trying to set my own expectation.

I hope we can get this for z-wave, this was one of the major features I wanted/needed, and it’s a bit disappointing it’s not available at launch. I’ve been having detection problems with my switch in my office and something like this would be a huge help.

With the official driver I see this toast whenever clicking into the device. Additionally it doesn’t have any settings for the parameters (like P103+). The on/off switch and motion status do work despite the toast. [Screenshot_20260127_235459_SmartThings~2] [Screenshot_20260127_235535_SmartThing…

@knozturk @h3lladvocate it is not actively being worked on so I don’t expect it to be done within the next couple of months. @SReg can you post your driver version screen and scroll down a little more on the device page? [image] [image]

Z-Wave Motion Switch • Project Linus • Bug & Enhancement Thread

Product Support Hardware & Firmware Help

SViel January 28, 2026, 2:37am 58

I wonder if this post belongs in this thread. Seems that there might be a bug with the presence detection of the Red series motion switch. Thoughts?