Blue Series 2-1 Firmware Changelog | VZM31-SN

Just for reference, it is hitting the Hubitat “Refresh” button before refreshing the browser page.

1 Like

Yes, bad wording on my part. Configure All then Refresh.

My switches also don’t show up in my zigbee routing table, so who knows at this point. They work with my NodeRed logic, which is all I need.

FYI, it looks like firmware 2.08 is available on the Hubitat platform. If you have the latest driver then double click on the “Update Firmware” button and watch the logs to see what is going on.

1 Like

2.08 update was smooth & easy on Hubitat, and all is working great thus far – thank you, @EricM_Inovelli

1 Like

Where you be a good place to post requests/suggestions for future firmware?
This thread appears to be more about changelog, and installation issues.

How about here…

4 Likes

jealous, waiting for HA 11.3 release so i can get the update :face_holding_back_tears:

2 Likes

Awesome. Thank you.

2022.11.3 should be released soon.

9 Likes

2022.11.3 was just merged.

3 Likes

And showing up for me in the UI. Here we go!

2 Likes

Installed 2022.11.3 and Z2M still says 2.07 is the latest firmware version for all 4 of my switches. Restarted Z2M and still seeing the same thing. Am I missing something?

The firmware json file has 2.07 as the latest. The file lives outside Z2M so once @EricM_Inovelli updates it to include 2.08 you should be able to update.

I just made 2.08 available to z2m and ZHA users.

6 Likes

All 4 switches have updated to 2.08 and binding now works again! Woot! You guys rock! Thank again for everything you guys do.

3 Likes

Hey @EricM_Inovelli , just updated to 2.08 on my switches and group bindings still are not working. I’ve gone through and wiped all the groups/etc but nothing seems to fix them. Any thoughts? Using z2m and switches report v2.08

I was having issues where the group binding wasn’t working as intended, like one bulb didn’t change state. I ended up removing the switch from z2m and re - adding it and re binding it fixed the issue. So mabye thta will work for you as well.

1 Like

Nope :frowning: gave it a go but didn’t fix it. thanks for the suggestion

Can you verify these settings?:

The group (if it includes the vzm31-sn) should have ep1 in it. The binding should be from ep2 of the vzm31-sn to the group.

2 Likes

Ahhh there it is. I was binding ep1 (of the switch) to the group. Could’ve sworn this is what i did pre v2.0.5 and it worked fine. I must have missed those details somewhere…sorry about that.

thank you!

1 Like